Image Width (pixels):
| Analyzed File: | X Axis Idler Pulley Bracket.ipt |
| Autodesk Inventor Version: | 2023.2 (Build 272271000, 271) |
| Creation Date: | 1/12/2023, 2:28 PM |
| Study Author: | elimb |
| Summary: |
General objective and settings:
Design Objective Single Point Study Type Static Analysis Last Modification Date 12/7/2022, 1:39 PM Model State [Primary] Detect and Eliminate Rigid Body Modes No iProperties
Summary
Author elimb Project
Part Number X Axis Idler Pulley Bracket Designer elimb Estimated Cost $0.00 Creation Date 12/7/2022 Status
Design State WorkInProgress Physical
Material Thermoplastic Resin Density 0.0462429 lbmass/in^3 Mass 0.0681137 lbmass Area 15.8057 in^2 Volume 1.47295 in^3 Center of Gravity x=0.00225208 in
y=0.559541 in
z=0 inNote: Physical values could be different from Physical values used by FEA reported below.
Mesh settings:
Avg. Element Size (fraction of model diameter) 0.1 Min. Element Size (fraction of avg. size) 0.2 Grading Factor 1.5 Max. Turn Angle 60 deg Create Curved Mesh Elements Yes Material(s)
Name Thermoplastic Resin General Mass Density 0.0462429 lbmass/in^3 Yield Strength 8296.16 psi Ultimate Tensile Strength 16534.3 psi Stress Young's Modulus 478.625 ksi Poisson's Ratio 0.36 ul Shear Modulus 175.965 ksi Part Name(s) X Axis Idler Pulley Bracket.ipt Operating conditions
Bearing Load:1
Load Type Bearing Load Magnitude 30.000 lbforce Vector X 30.000 lbforce Vector Y 0.000 lbforce Vector Z -0.000 lbforce Selected Face(s)
Bearing Load:2
Load Type Bearing Load Magnitude 10.000 lbforce Vector X -0.000 lbforce Vector Y 0.000 lbforce Vector Z -10.000 lbforce Selected Face(s)
Fixed Constraint:1
Constraint Type Fixed Constraint Selected Face(s)
